Eurocheck Non-Return Valve

Not just a valve but a universal solution

Would you like to watch the video?

Range: DN80-DN300
Applications: Can be used in both horizontal and vertical systems with rising flows to prevent flow reversal. Available for potable water and sewage applications.
Pressure Rating: PN16
Versions: Free hanging, Lever and Weight, Lever, Weight and Safety Guard. Proximity switches available on request

The Eurocheck is a swing check valve manufactured to the requirements of EN 1074-3 for use in both horizontal and vertical systems. Optional lever, weight and guard kits are available for installation on site. The kits are universal as they can be used in either left, right, vertical or horizontal orientation and can be easily fitted on site once the valve has been installed eliminating the need for valve disassembly before installation. The improved functionality will allow our customers to significantly reduce stock holding without compromising the flexibility to quickly respond to design changes, as well as reducing the total cost of installation.

How will the new universal kit solution help me?

• 50% reduction in time and cost of installation
• No disassembly of valve required before installation
• Reduced time and cost of repair/conversion
• Valve can be converted under pressure
• 50% reduction in stock keeping
• Only 4 products required to meet ALL application needs (8 previously)
• No loss in valve integrity
• Removal of bonnet no longer required
• H&S benefit
• No contact with effluent during conversion in sewage applications due to no requirement for valve bonnet removal.

Key features

• Ductile Iron body provides high strength to weight ratio. Safety factor in excess of 4
• Stainless steel hinge pin with copper alloy bushes ensures a positive location and the smooth operation of the lever and weight valve
• Double 'O' ring contained within the copper alloy bush provides a leak-tight seal
• Seat tightness in accordance with EN12266-1 - Grade D
• Valve body coated in WRAS approved blue fusion bonded epoxy in accordance with EN14901
• Better hydraulic flow
• Less prone to blockage, but in case of blockage it is easier to clear